Call 916-573-6734 to schedule an inspection by phone. You’ll need:

• 11-digit permit number (example: NRES22-03945).
• 3-digit inspection IVR Code.

Log in to eTRAKiT and search for your permit via address or contact the Building Counter at 916-461-6201 or epc@folsom.ca.us with the address and scope of work.

How to Locate Your Permit Number in eTRAKiT

1. Log in to eTRAKiT (new users will need to create a login).
2. Under Permits on the left, click on “Search for a Permit.”
3. Search by address and type in the address (do not include Ct., St., Rd., Way, etc.).
4. Locate the permit number for the Inspection you are requesting.

1. Log in to eTRAKiT.
2. On the left blue bar, click on "scheduled” under Inspections.

• Log in to eTRAKiT and cancel the scheduled inspection online.
• Call or e-mail one of the following inspectors directly:

Mike Toledo - mtoledo@folsom.ca.us or 916-220-3053
Lorenzo Aguilar - laguilar@folsom.ca.us.ca.us or 916-220-3049
Enrique Jimenez - ejimenez@folsom.ca.us or 916-220-3037

• Contact the Building Counter at epc@folsom.ca.us.

Inspections must be canceled prior to arrival of the inspector, or a re-inspection fee may be assessed.

• All job sites shall be ready and accessible for inspection by 8 a.m. on the day of the inspection. This includes ladders in place for roofing, HVAC, or similar inspections.

• Inspection time preferences may be requested; however, it is not a guarantee.

• Depending on the inspection workload for the day, some inspections may be rolled. If your inspection is rolled, the inspector will contact you and it will need to be rescheduled for the following day.

• Next day inspections can be requested until 3pm.  Any inspections requested after 3pm will be scheduled a minimum two days out.

A Certificate of Occupancy (CO) is issued once a project has met all Conditions of Approval and completed work according to the approved plans and permits.  The CO Certificate is signed by the Building Official and issued by the Building Inspector on the project.  Prior to a CO, all COO (800 series) inspections of are required to be completed with a PASS status.  Once that is completed, the 900 series FINAL INSPECTION shall be scheduled and performed by the Building Inspector.  It is encouraged to discuss with your Building Inspector what inspections are required early on to ensure minimal impact to the construction schedule.  Not all departments can accommodate next day inspections and some may take up to 5 days before approval.

A Temporary Certificate of Occupancy (TCO) may be issued on a case-by-case basis dependent on project scope, size, and type.  If a TCO is feasible, it must be discussed with your Building Inspector as some additional documents may be required.  See form B350 below for additional information for TCOs.

B350 TCO Process

Certificate of Occupancy Inspections and timelines: